Insight Sign Systems

 Trade Suppliers of Extruded Aluminium Sign Systems
NewsServiceProductsHistoryContactLinks


Products > Wayfinder
 Half-Circle Post
Click to ViewThe 100 mm Half-Circle Post was designed for a fast food car park sign, for which it offers a very attractive slimline monolith appearance, with the ability to be internally illuminated by stencil-cutting the aluminium panels, then applying acrylic to the rear. Lamps must not however be directly behind lettering, as this will cause bright spots and striping.
   This post is mounted in position using a 50 mm square insert support post which provides the strength to allow signs up to 900 x 1,800 mm to be constructed.
   Because of the channel configuration, this post can also create a number of other styles, accepting double panels, allowing acrylic to be used in addition to aluminium.

Get Acrobat ReaderScaled Cross-Section Illustrations

Scaled cross-section illustrations in Adobe Acrobat .pdf format can be downloaded by choosing your variation below and clicking the thumbnail. If you require software to allow you to view .pdf files, click on the “get Acrobat Reader” icon to the right to download Acrobat Reader, free of charge.
   Please note that to print these scaled illustrations from Acrobat Reader properly, with the scale ratio remaining intact, you must make sure that the Page Scaling (or Fit to Page) option is set to None in the print dialog box.
Half-Circle Post non illuminated Half-Circle Post illuminated
HALF-CIRCLE POST
non-illuminated		 HALF-CIRCLE POST
can be internally illuminated if lettering is spaced so as to allow lamps to be positioned in letter-free areas to prevent striping