|
|
|
|
        
|
Products > Spectra Applications |
|
This page is intended to give an at-a-glance look at the whole Spectra system, and the capabilities of each of its parts, allowing you to identify which part of the Spectra system would be most suited to your requirements. * - Case width based upon single-sided case (see specific product areas for other widths). Where multiple trim styles are available, example is based on standard trim for 5/6 mm thick panels. Note: Standard and Bullnose trims are available to hold either 3 mm or 5/6 mm panels. Wide trim holds 5/6 mm thick panels only. |
|
STANDARD |
| Sign Frame 36mm WIDE FRAME* |
| Trim | • STANDARD • BULLNOSE • WIDE |
Applications | Single-sided externally illuminated or non-illuminated signs |
| Face Types | • ACRYLIC • ALUMINIUM • FOAMEX |
Restrictions | Enquire |
| Mini-Twin Integral 55mm WIDE FRAME |
| Trim | • INTEGRAL | Applications | Double-sided non-illuminated signs with bonded aluminium faces or slide-in acrylic panels |
| Face Types | • MOULDED ACRYLIC • STENCIL-CUT ALUMINIUM |
Restrictions | Maximum depth 1,245mm. Illumination only when using moulded panels, or small letters |
| Mini-Twin Integral MID-RAIL SECTION |
| Trim | • N/A | Applications | Used for creating divisions in the mini-twin integral |
| Face Types | • N/A | Restrictions | N/A |
| Slimline 99mm WIDE CASE* |
| Trim | • STANDARD • BULLNOSE • WIDE |
Applications | Single or double-sided back-lit illuminated signs |
| Face Types | • MOULDED ACRYLIC • STENCIL-CUT OPAQUE ACRYLIC • STENCIL-CUT ALUMINIUM |
Restrictions | Flat translucent acrylic panel will show up lamps |
| Hinged Slimline 128mm WIDE CASE* |
| Trim | • STANDARD • BULLNOSE • WIDE |
Applications | Single or double-sided back-lit illuminated signs |
| Face Types | • MOULDED ACRYLIC • STENCIL-CUT OPAQUE ACRYLIC • STENCIL-CUT ALUMINIUM |
Restrictions | Maximum size 2,438mm. x 1,829mm. Flat translucent acrylic panel will show up lamps |
| Standard 161mm WIDE CASE* |
| Trim | • STANDARD • BULLNOSE • WIDE |
Applications | Single or double-sided back-lit illuminated signs |
| Face Types | • ACRYLIC PANELS • STENCIL-CUT ALUMINIUM |
Restrictions | Enquire |
| Hinged Standard 190mm WIDE CASE* |
| Trim | • STANDARD • BULLNOSE • WIDE |
Applications | Single or double-sided back-lit illuminated signs |
| Face Types | • ACRYLIC PANELS • STENCIL-CUT ALUMINIUM |
Restrictions | Maximum size 2,438mm. x 1,829mm. |
|
ALU-FACE |
| Alu-Frame 69mm WIDE FRAME |
| Trim | • INTEGRAL | Applications | Single-sided non-illuminated aluminium-faced signs, or illuminated where lettering has space between lines to hide lamps |
| Face Types | • ALUMINIUM PANELS • STENCIL-CUT ALUMINIUM |
Restrictions | Maximum depth 1,245mm. Hinging restriction Illumination where letter size permits |
| Alu-Face 132mm WIDE FRAME |
| Trim | • INTEGRAL | Applications | Single or double-sided back-lit aluminium-faced signs |
| Face Types | • STENCIL-CUT ALUMINIUM | Restrictions | Maximum depth 1,245mm. Hinging restriction on lengths over 6,000mm. |
| Alu-Face 194mm WIDE FRAME |
| Trim | • INTEGRAL | Applications | Single or double-sided back-lit aluminium-faced signs |
| Face Types | • STENCIL-CUT ALUMINIUM | Restrictions | Maximum depth 1,245mm. Hinging restriction on lengths over 6,000mm. |
|
SPEED FLEX |
| Speed Flex Retro 75mm WIDE CASE* |
| Trim | • FULL-FACE | Applications | To fit most types of illuminated signcases |
| Face Types | • FLEXIBLE SUBSTRATES | Restrictions | Maximum size 45m.² |
| Speed Flex Frame 61mm WIDE CASE* |
| Trim | • FULL-FACE | Applications | Single-sided non-illuminated or externally illuminated signs |
| Face Types | • FLEXIBLE SUBSTRATES | Restrictions | Maximum size 45m.² |
| Speed Flex Integral 210mm WIDE CASE* |
| Trim | • FULL-FACE | Applications | Single-sided back-lit illuminated signs. Retro can be fitted to make double-sided |
| Face Types | • FLEXIBLE SUBSTRATES | Restrictions | Maximum size 45m.² for single-sided |
| Speed Flex Hinged 220mm WIDE CASE* |
| Trim | • FULL-FACE | Applications | Single-sided or double-sided hinged back-lit illuminated signs in double-sided format |
| Face Types | • FLEXIBLE SUBSTRATES | Restrictions | Maximum size 45m.² Restrictions on double-sided signs Hinging restriction on lengths over 6,000mm. |
| Speed Flex Frontloader 209mm WIDE CASE* |
| Trim | • BEVELED TRIM | Applications | Single-sided back-lit illuminated signs for recessed areas |
| Face Types | • FLEXIBLE SUBSTRATES | Restrictions | Maximum size 45m.² |
|
POSTER |
| Poster Frame 64mm WIDE FRAME |
| Trim | • POSTER | Applications | Single-sided non-illuminated posters or transparencies |
| Face Types | • ACRYLIC • ALUMINIUM • FOAMEX |
Restrictions | Maximum size 2,438mm. x 1,829mm. |
| Poster Case 131mm WIDE CASE |
| Trim | • POSTER | Applications | Single-sided or double-sided back-lit posters or transparencies |
| Face Types | • ACRYLIC | Restrictions | Maximum size 2,438mm. x 1,829mm. |
| Poster Case 193mm WIDE CASE |
| Trim | • POSTER | Applications | Single-sided or double-sided back-lit posters or transparencies |
| Face Types | • ACRYLIC | Restrictions | Maximum size 2,438mm. x 1,829mm. |
| Display Case 100mm WIDE CASE |
| Trim | • POSTER | Applications | Single-sided format only to display information or products |
| Face Types | • ACRYLIC • ALUMINIUM • FOAMEX |
Restrictions | Maximum size 2,438mm. x 1,245mm. |
| Easyclic Frame 67mm WIDE FRAME |
| Trim | • 50mm. WIDE BULLNOSE FLIP-OPEN | Applications | Single-sided non-illuminated poster or transparency |
| Face Types | • ACRYLIC • ALUMINIUM • FOAMEX |
Restrictions | Maximum size 6,000mm. x 1,245mm. |
| Easyclic Slimline 129mm WIDE CASE |
| Trim | • 50mm. WIDE BULLNOSE FLIP-OPEN | Applications | Single-sided back-lit illuminated sign. Frame can be fitted to make double-sided |
| Face Types | • ACRYLIC | Restrictions | Maximum size 6,000mm. x 1,245mm. |
| Easyclic 192mm WIDE CASE |
| Trim | • 50mm. WIDE BULLNOSE FLIP-OPEN | Applications | Single-sided back-lit illuminated sign. Frame can be fitted to make double-sided |
| Face Types | • ACRYLIC | Restrictions | Maximum size 6,000mm. x 1,245mm. |
| Side Column 100mm WIDE CASE |
| Trim | • INTEGRAL | Applications | Allows poster case trim to be fitted providing a radius edge case |
| Face Types | • POSTERS • TRANSPARENCIES |
Restrictions | Maximum size 2,438mm. x 1,829mm. |
|
FASCIA CURVE |
| Fascia Curve see full specification |
| Trim | • FLIP-OPEN HINGE | Applications | Single or double sided |
| Face Types | • ALUMINIUM PANELS • SMALL ACRYLIC PANELS |
Restrictions | Three standard depths: 368mm, 670mm. and 968mm. Any length in aluminium |
